Deskripsi

Manley Dual Mono Mic Preamp Limited Edition 30th Anniversary

In honor of our 30th Anniversary, we are producing a limited quantity of our classic Dual Mono Microphone Preamplifiers – first introduced almost thirty years ago, they make for a perfect XXX LIMITED EDITION!

This special edition features custom faceplate & insert coloring and engraving, and ships with a signed Certificate of Authenticity and a letter from EveAnna Manley.

You can read that letter right here if you’re interested in the full history of the Dual Mono Mic Pre, the technologies inside it, and how it represents the beginnings of the PRO AUDIO division of Manley Labs.

SPECIFICATIONS

Flat frequency response from 10Hz-60KHz
Mic input PHASE REVERSE switch
2400 Ohm mic input Z; 48V phantom power built-in
Hi-Z (100 kOhm) 1/4″ DIRECT INPUT
Noiseless conductive plastic INPUT attenuators
<0.05% THD @ 1kHz S/N ratio: 80dB
EIN: -125dB
Adjustable FEEDBACK / GAIN switch selects 5dB steps between 40 to 60 dB of gain
Hi-current drive <50 Ohm LO-Z 1/4″ & XLR outputs
AUTO MUTE w/ warm-up delay for power up/down
Max. input (with input pad fully open): 450mV
Max. output: 32dBu
Max. output (into 600 Ohm load): ( 15dBm)
Power consumption: 36 watts

Operating mains voltage: Units are purpose built for original destination country’s mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. Power transformer must be replaced in order to change mains operating voltage. 120VAC units may NOT be rewired to put the primaries of the power transformer in series for 220-240V operation or a large radiated field of hum will develop. If changing locations/voltages, the power transformer must be replaced with the dedicated one for the voltage at which it will operate.
Mains Voltage Frequency: 50~ 60Hz
Dimensions: 19″ x 1 3/4″ x 10″ (occupies 1u)
Shipping Weight: 12 lbs.